Barite Minerals Shaker Table for Gravity Concentration Processing

• Customization: Available
• Type: Shaking Table
• Voltage: Multiple Voltages
• Model NO.: 6-S 7.6/6-S 4.08/6-S 1.95/6-S 0.5
• Weight: <1T
• Material: Carbon Steel
• Material Feature: Corrosion and Rust Resistance
• Energy Saving: Energy Saving
• Warranty: 1 Year
• Color: Selectable
• Customized: Customized
• Condition: New
• Function: Gravity Separation
• Drive Mode: Electric Motor or Diesel Engine
• Power: Multiple Power
• Application: Mining and Mineral Processing
• Transport Package: Containerized
• Specification: 6-S 7.6/6-S 4.08/6-S 1.95/6-S 0.5
• Trademark: HZE
• Origin: China
• HS Code: 8474100000
• Production Capacity: 120 Sets/Year

Product Description

Barite Minerals Shaker Table for Gravity Concentration Processing

Essentially, the shaking table is a mechanized gold pan which runs with a high degree of efficiency and continuously.The driving mechanism causes the deck to make longitudinal reciprocating shaking. This shaking motion is helpful to transport the concentrate or heavy materials to the concentrate side of the deck.

Slurry continuously enters the slurry distribution box and flows laterally and evenly to the deck. At the same time, the flushing water is continuously injected into the water distribution box. The lateral water flows over the riffles and stirs vortices between the riffles. The materials in the grooves are loosed under the action of water flow, and the fine particles are suspended in the upper layer of grooves and the mineral particles roll over to make the heavy minerals enter the lower layer of the grooves. Each layer of water has various velocities based on the distance from the water's surface.

The highest velocity is the layer just below the surface of the water, and the lowest velocity layer is above the deck surface. In between these layers are differing velocities, based upon the distance from the water's surface.  According to the distance to the water upper surface, each water layer has different speed. The highest velocity is a layer of water below the water top, while the velocity near the bed surface is the lowest.

It is difficult for heavy minerals to climb over the riffles. Under the reciprocating motion of the bed surface, the heavy minerals in the grooves gradually move to the concentrate side of the deck in the grooves. The mixed minerals with medium specific gravity and not fully liberated particles flow to the middlings area. The lateral water flow scours the lighter mineral particles  to enter the next groove, and finally flow to the tailings side.







The shaking table can be driven by motor or diesel engine according to the actual demand.

The deck meets the separation needs of coarse sands, fine sands and slimes by different shape of riffles.

According to the concentration situations, the lateral angle of the deck can be adjusted within the range of 0-5 degrees to obtain the best concentrate grade and recovery rate.

According to the size and specific gravity of the mineral particles, it is easy to adjust the longitudinal swaying stroke to achieve the best operation.

The deck surface with enough strength is coated with wear-resistant material to prolong the service life.

The split position of concentrate area, middlings area and tailings area can be adjusted according to the requirements.

The special slurry distributior, water distributor and deck riffles structure can achieve small water consumption.



The shaking tables are widely used to separate tungsten, tin, tantalum, niobium, gold and other rare and precious metals. In the production of small, medium or large scale mineral processing plants, it is also adopted for different processing section such as roughing, cleaning and scavenging the different particle size of coarse sands (2-0.5mm), fine sands (0.5-0.074mm), slimes (-0.074mm) and so on. The shaking tables separate minerals of iron, manganese ore or coal also. The effective recovery particle size range is 2-0.22 mm when the shaking tables separate tungsten and tin.

Model	6-S 7.6			6-S 4.08	6-S 1.95	6-S 0.5
Deck Type	Coarse Sand Deck	Fine Sand Deck	Slime Deck	Three deck options are available.
Area of Deck (m^2)	7.6	7.6	7.6	4.08	1.95	0.5
Max. Feeding Size (mm)	2	0.5	0.074	Sand:-2 Slime:-0.1	Sand:-2 Slime:-0.074	Sand:-2 Slime:-0.074
Solids Throughput (t/h)	1~1.8	0.5~1	0.3~0.5	0.4~1.5	0.3~0.8	0.05~0.2
Slurry Concentration (%)	20~30	18~25	15~20	10~30
Stroke (mm)	16~22	11~16	8~16	6~30	12~28	9~17
Swaying Frequency (Hz)	3.7	4.2	4.7	3.5~5.3	4.2~7.5	4.7~7.7
Water Consumption (m^3/h)	0.7~1	0.4~0.7	0.4~0.7	0.3~1.5	0.2~1	0.1~0.5
Riffles Groove Section	Rectangle	Sawtooth	Triangle	Rectangle, Sawtooth and Triangle
Motor Power (kW)	1.1	1.1	1.1	1.1	1.1	0.55

1.What is the main business scope of your company?
HZE is a company with R&D center, design institute, manufacturing factories, installation and commissioning teams.Our customers are in the mining and mineral processing fields.Our major businesses include mineral processing EPC (engineering, procurement and construction), project consultation, engineering design, mineral processing equipment manufacturing, on-site installation, commissioning, staff training, customer project operation management, spare parts supply and technical support.Customers are free to choose any one or any combination of our services.



2.What are the outstanding advantages of your company?
The one-stop service of mineral processing engineering project and equipment is our core competitiveness.
The most important feature that HZE distinguishes itself from other engineering companies, design companies or consulting companies is that we are also an equipment manufacturer with a production plant of 50,000 square meters, and we have complete manufacturing rout and the related equipment.
HZE distinguishes itself from other equipment manufacturers by owning its own R&D center and engineering design institute.
HZE distinguishes itself from many mining machinery enterprises by possessing an expert team with members including not only senior engineers of the company, but also top Chinese technical experts, university professors and researchers.




3.What are the characteristics of your company's 3D design?
HZE not only uses 3D software to design equipment, but also uses 3D software to design process flow, pipeline, steel structure, auxiliary facilities, etc.Of the whole mineral processing project.We even use 3D design for equipment packaging, container packing and equipment instructions manual.This greatly improves the quality of equipment and engineering, shortens the construction period, facilitates technical discussion and evaluation, facilitates project management, improves construction safety and reduces project cost.


4.What are the service features of your company?

1. Customers who whether buy our equipment, or entrust us with EPC, or require us to provide a certain service, cooperate closely with us to carry out specific operations and supervise our implementation throughout the process.
2. HZE will try to understand the basic situation and needs of customers as detailed as possible before the sale, formulate a preliminary plan according to the specific situation of customers, and get unanimous opinions after communications and discussions with customers to determine the plan.
3. We set up customer files for every customer who signed the contract with us and upload them to the Cloud where customers can also get an account and password.Customers can have all the documents, videos and pictures, technology, services, execution, operation, management and control, maintenance and so on related to the business.
4. Whether it is in the process of general contracting, equipment manufacturing or providing some kind of service, we welcome customers to know about our implementation on the spot or through the network, and put forward requirements and opinions.
5. We assist users who have used our products to formulate operation specifications and make suggestions on maintenance plans and spare parts inventories.In addition to routine on-site installation, commissioning and training, during the production period after we handing over equipment to customers for use, we often understand the equipment using situations through the network and provide guidance and training to customer management and operators.
6. For the clients who have just start the mining business, we provide the opportunity of training and practice in China's mines for the clients' employees, until they are skilled in operation and maintenance